> Mine were welded as well (three spot welds, and the lip of the spring
> box).
I'm not talking about spot welds, here. Mine are fully welded on all three
sides (a professional-looking job). The only way they are going to come out
easily is attached to that part of the floor pan, which is a really thick
patch brazed to the original pan under a tacked in patch on the inside -
three layers with 1/2" gaps between in places. The patch job is actually
sound and much stronger than the original. I would have left it in if it
didn't look so bad.
Michael Rowe
'74 Midget
'60 Sprite kit
Long Island, NY
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|