Bobby,
Did the JB go through to the base colour coat or just the clear coat?
If it went through the base colour coat it will have to be blended out.
Do you still have some of the original colour laying around to either do a
blend yourself or have someone else do a blend?
If you would like, this is my field, I can walk you through the process. .
you will need an airbrush that can be set to a bit of a wide setting.
It is also a bit tricky. I have done many of these that later, you cannot
tell. I have also had a few difficult ones that took extra work to get the
blend in place.
Kirk
59 F AYE
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|