spridgets
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Spridgets] 1275 pressure plate question

from [David Lieb] [Permanent Link][Original]
To: Spridgets <spridgets@autox.team.net>
Subject: Re: [Spridgets] 1275 pressure plate question
From: David Lieb <72spridget@gmail.com>
Date: Wed, 6 May 2009 16:03:26 -0500 
> A throwout bearing is not designed to spin constantly.

And that goes double for these carbon-faced cheapo things that those
of us with non-1500 Spridgets are supposed to use.
David Lieb
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Spridgets] Pull the tranny or not? Opinions wanted, bighealey
Next by Date:  Re: [Spridgets] Home repair was Le Macchine d'Italia (No LBC), David Lieb
Previous by Thread:  Re: [Spridgets] 1275 pressure plate question, Dave Grandeffo
Next by Thread:  Re: [Spridgets] 1275 pressure plate question, Ron Soave
Indexes:  [Date] [Thread] [Top] [All Lists]