OK, but have you used Hylomar? It is good stuff. A little goop to
hold the gasket to the valve cover and a little Hylomar between the
gasket and the head and you can remove and replace the valve cover
many times. You may have to use a little more Hylomar after 2 or 3
removals,
but it will seal and it won't stick the gasket to the head.
Hylomar = Good stuff.
You should look into it. If you don't like it, you still will know a
little more than you did before about it.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|