Re: [Spridgets] Seats

To:	Andrew Payne <andrewpayne@intrex.net>
Subject:	Re: [Spridgets] Seats
From:	derf <derf247@gmail.com>
Date:	Fri, 10 Apr 2009 08:27:01 -0600

I've run Spridgets without the seat rails, just clamped the seat to the floor.
I also have a jig around here somewhere to adapt steering wheels to
70s center hubs, as shown in this pic:
http://s32.photobucket.com/albums/d37/dovco/74Midget/?action=view&current=dash.jpg
The smaller diameter wheel makes a marked difference in leg room.
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread]	Current Thread	[Next in Thread>
[Spridgets] Seats, Kirk Hargreaves Re: [Spridgets] Seats, derf Re: [Spridgets] Seats, Bud Osbourne Re: [Spridgets] Seats, George Re: [Spridgets] Seats, corvallis Re: [Spridgets] Seats, Bob Spruck Re: [Spridgets] Seats, WeslakeMonza1330 Re: [Spridgets] Seats, Linda Grunthaner Re: [Spridgets] Seats, Andrew Payne Re: [Spridgets] Seats, derf <=

Previous by Date:	Re: [Spridgets] rusty bits, Andrew Payne
Next by Date:	Re: [Spridgets] rusty bits, Ed's Shop
Previous by Thread:	Re: [Spridgets] Seats, Andrew Payne
Next by Thread:	Re: [Spridgets] [Wedge] Hot Rod Magazine, WFO Herb
Indexes:	[Date] [Thread] [Top] [All Lists]