Interesting way to make a mould. I wounder if you spray oil on the plastic
if the foam will peel of after dry. I think I can use this in class on
student projects. My students found that they were able to make silicone
gaskets by milling out the shape on a wax block as the silicone pops right
out of the wax mould when dry.Lin
On Thu, Mar 26, 2009 at 9:05 AM, Michael Rowe <mdrowe@optonline.net> wrote:
> Get a large plastic bag from a laundry or some such. Lay it over the area
> you want to measure. If the bag is really thin, put another protective
> layer of plastic over and under. Squirt a can of foam insulation into the
> bag and close the top on it. You will get a mold of the available space.
>
> Michael Rowe _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as grunthaner@gmail.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|