I used these guys for my Healey Tack and Speedo. Great work.
Call first and they will tell you how to measure for recalibration if yours is
off due to different rear end / 5 speed / tires etc.......
---- Richard Ball <richb@u.washington.edu> wrote:
> Michael
> I don't know anything about this company, but they may be able to source the
> pats you need.
>
> http://www.nisonger.com/index.htm
>
> Rich Ball
> '76 Midget
> Everett, WA
> ----- Original Message -----
> From: "Michael Rowe" <mdrowe@optonline.net>
> To: <midgetsprite@yahoogroups.com>; "spridget Chat Group"
> <spridgets@autox.team.net>
> Sent: Tuesday, March 24, 2009 9:02 AM
> Subject: [Spridgets] Trip odometer
>
>
> > My trip odometer will not zero. On the far left of the wheels is a white
> > plastic spacer with a notch that engages a pawl in the plastic housing.
> > That pawl has become too stiff with age to release from the notch with
> > ordinary force and the shaft won't turn at all. The only thing I can
> > think of is to grind one or the other down to reduce the friction. Any
> > other suggestions? Any repair sites other than Anthony Rhodes?
> >
> > Michael Rowe
> > '74 Midget
> > '60 Bugeye in contract
> > Long Island, NY
> > _______________________________________________
> > Support Team.Net http://www.team.net/donate.html
> >
> > You are subscribed as richb@u.washington.edu
> >
> > http://www.team.net/archive
> >
> > http://autox.team.net/mailman/listinfo/spridgets
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as bighealey@charter.net
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|