[Spridgets] '68 Sprite heater core/blower motor

[Gerard Chateauvieux <pixelsmith@gerardsgarage.com>]

Does anyone have a good photograph under the bonnet of an original  
heater setup on a '68 Sprite?

I have a complete setup, identical to what was used on earlier cars,  
which I thought was still used through 1968. I have the box with the  
core mounted, extension tube with the air flow shutoff valve attached  
to that. When I try to mount the motor, it's a couple inches too far  
over to line up with mounting holes. I'm guessing the blower motor  
should be different for this model.

I know later models used a combined blower and core box, but I think  
those came in on later models.

pictures here:

http://gerardsgarage.com/Garage/heater/heater.htm

Thanks

Gerard
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets