Matt,
I agree with the others. For the amount of power you are looking for,
you NEED to talk to one or all of the names the others have given you.
David Vizard, David Anton of APT, Tom Colby at Speedwell, Colin Dodds
at Spriteparts.com.au and the guy Ron suggested who has built
many championship winning motors. At least talk to them, or better yet,
have one of them build the engine. They'll make sure everything is
compatible.
They are the experts and will have you spending your money
in the right areas, not just what sounds cool.
Or maybe for less money, and want to go REALLY fast right now,
Buy Tom Colby's former car, it's on Ebay now, no bids at $18,000.
Built by a guy who knows em well. worth alot more than that in parts.
http://tinyurl.com/6amnvj
or number 110321171654
if I only had the money.....
Brian S
> Date: Sun, 7 Dec 2008 15:23:38 -0500
> From: mhagopian@hoppetool.com
> To: wbmcleod@gmail.com
> CC: spridgets@autox.team.net
> Subject: Re: [Spridgets] A series crankshafts
>
> I dont know but I have been reading up on camshafts,
>
> I was wondering if anyone knew the advantage of a "scatter pattern" cam? I
> have one in my bug right now, and with this new motor we are building, we
> are looking for the best cam for our needs... power from 4500-7500rpm. Any
> suggestion on a cam?
>
> Update on the new motor:
> Looks like we are going to go with hoosier 185/60/13, 4.55 rear ratio, 5spd
> transmission, and this motor we are building... all bearings and pistons
are
> going to be calico coated to decrease resistance, we are going to go with a
> full titanium valve train, titanium rockers, titanium valves(oversized), we
> are going to stick with stock springs because of the decreased weight in
> valves so hopefully we wont run into any valve float, we are going to have
> the connecting rods lightened 100 grams each, engine is going to be bored
> .040" over, still deciding on what pistons to go with(any suggestions?),
and
> we are going to have a lot of head work done. hopefully to have an end
> result of 120hp and capable of 120mph. I did the calculations and with this
> combo we need to reach 7500rpm to hit 120mph.(this doesnt include drag)
>
> Anyone have a suggestion for a good A series 1275 book? I have Des Hammills
> book but its just info, doesnt give any inside info on which parts to use,
> just suggestions on good street motors and what is neccessary to have not
to
> have a meltdown of a race motor...
>
> Thanks guys
_________________________________________________________________
You live life online. So we put Windows on the web.
http://clk.atdmt.com/MRT/go/127032869/direct/01/
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|