Specifically, I don't know. In general, it could be near that headlight
coming out of the wiring harness. There'd be a self-tapping screw fitting on
the wire end that would be attached to the body. At worse, it would be thru
the headlight rim. Others here will chime in with better details. ...bill
===================================================================
-----Original Message-----
From: spridgets-bounces@autox.team.net
[mailto:spridgets-bounces@autox.team.net] On Behalf Of
ryan.kubanoff@comcast.net
Sent: Saturday, November 29, 2008 6:26 AM
To: spridgets@autox.team.net
Subject: Re: [Spridgets] headlight question
Where is the ground for that headlight?
ryan
-------------- Original message --------------
From: <corvallis@peoplepc.com>
> Usually means there is a poor ground for that headlight.
> Second, clean off the contacts on the headlight with an eraser or steel
> wool. Then try to clean off the inside of the connectors that go on the
> headlight.
> ...bill in oregon
> ================================================
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|