Joe...
you could be over-tightening in which case
the distributor will have a tendency to "rise" and "squirt out" of it's port.
I am assuming the distributor fits properly ALL THE WAY DOWN it's port to
begin with, of course.
Very little tightening is actually required to
"hold" the dizzy in place. Fr'instance, I can actually turn mine by hand (not
too easily, mind you) after "tightening" it down.
Cap'n. Bob '60 :{)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|