ah...HA! that's the problem! you did not go to the bar first!
my apologies. bu that was way-way to tempting for me to not to reply.
chuck
"been there , broke that , fixed that and broke it again........"
-----Original Message-----
>From: Matt Hagopian <mhagopian@hoppetool.com>
>Sent: Aug 21, 2008 11:37 PM
>To: spridgets@autox.team.net
>Subject: [Spridgets] OH NO!!
>
>When I got home from the track I found this before I started removing the
>motor...
>Removed the rocker cover and discovered that the keepers had come out of one
>valve, and it's valve head broke off and got hammered by the piston. The
>motor won't turn in either direction, even with a BAR! This was the first
>time the motor had run for more than a couple minutes at idle.
>
>--
>Sincerely,
>
>
>Matt Hagopian
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|