spridgets
[Top] [All Lists]

Re: [Spridgets] Tach connections

To: Spridgets <spridgets@autox.team.net>
Subject: Re: [Spridgets] Tach connections
From: Marc <smarc@smarc.net>
Date: Wed, 14 May 2008 15:42:52 -0400
Umm, apparently it just didn't like my battery charger....

Marc



Marc wrote:
> Hi!
>
> I screwed something up, and my wiring diagrams are lame (apparently so 
> is my eyesight...)
>
> Got new harness in, one last checkout (on battery charger, 2 amp 
> setting) before I hook the battery up & try it out. When I energize the 
> ignition, the tach swings to about mid-scale (engine not running). I 
> have the white/black connected to the bullet connector on the back of 
> the tach, the green spade on the terminal right next to the white/black. 
> Theres a few black ground wires on a ring terminal, they are attached to 
> the mounting post. There is a ground terminal directly on the case of 
> the tach, but that was never used originally...
>
> So, does that green wire NOT go there?
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>