I'm a little confused here is that a Bugeye Body rear on a Square Body?
Lin
62 California Sprite (Pinky)
www.freewebs.com/lgrunthaner
On Sat, May 10, 2008 at 8:51 AM, Michael Rowe <mdrowe@optonline.net> wrote:
> Are bought interior patches like the spring hanger patch and associated
> rear panel patch normally butted in or lapped?
>
> I am wondering about the effect on the allignment of the spring bracket,
> if any as my rear floor has already been doubled with some fairly heavy
> sheet on the inside, so an interior lap there could be as much as 1/4" high.
> An exterior lap would not be so much off.
>
> Michael Rowe
> '74 Midget
> Long Island, NY
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as grunthaner@gmail.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|