David Lieb wrote:
> A quick examination seems to
> indicate that the piin in the latch must not be going far enough into the
> hole in the cone, but what is the best way to correct this?
David
Those pins wear out.
Try either a shim behind the pin, there should be one there as original,
either make a thicker one or double it up. It's just a metal spacer thing.
Examine the peg, the leading edge wears from years of hitting the latch.
Or days of wear if it's an asian repro but knowing Crash, it's an
original, don't even bother with the asian repros. 6 months max, less if
you use the door.
--
Frank Clarici
Toms River, NJ
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|