I've got a straight-cut gearbox that is stuck in first gear.
I previously had a stock gearbox with this same problem. I just removed
the side plate and pushed in the little balls while jiggling the gear
lever and it came loose pretty easily. I've since installed a spacer on
the shaft in that 'box to keep it from happening again.
This time I've applied the same method and got nowhere. Well, actually,
I did get the shaft to move a bit and the fork to shake around, but I
haven't been able to get it out of first. There doesn't seem to be
pressure on the balls, so it seems that something else is binding on it.
Anyone have a suggestion as to what to try next?
Thanks!
David
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|