David Lieb wrote:
> I am imagining a desire
> for a regulator between compressor and pipe, then a small filter/regulator
> on each drop with a lubricator on a couple of the drops. Yes? No?
Yes, a good regulater and a water separator right after the compressor.
Drain drops plumbed down past each outlet except maybe the fill the tire
outlet outside.
I don't like those se;f oilers because they seem to use a lot of oil.
A drop in the tool every 5 hrs of operation is all you need.
I had an oiler, my air ratchet was squirting oil all over.
Mini regulators are OK where you need them, powder coater gun, tire
fill, blow gun sometimes. But those are the things that leak becuse of
where they come from, yeah made to somebodys specs but they read from
right to left and from the back of the book to the front so everything
from there is back asswards. do NOT use one of those cheapie regulators
at the compressor. And do put in couplings so you can replace it later.
--
Frank Clarici
Toms River, NJ
_______________________________________________
Edit your replies
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|