spridgets
[Top] [All Lists]

Re: Back to EGT's

To: "Deikis, John G" <John.Deikis@va.gov>, <spridgets@autox.team.net>
Subject: Re: Back to EGT's
From: Peter C <peter@nosimport.com>
Date: Wed, 09 May 2007 11:25:40 -0500
At 07:41 AM 5/9/2007, Deikis, John G wrote:

>A little late with a response, but...
>
>I use the same gauge Suave Man gave the link to-dual gauge with crossing
>needles so it's easy to see if they are balanced.
>
>I have a thermocouple in #1 and #4 header pipe.
>
>Got it from Pegasus.
>
>Car ran great before I put in the gauge.  Once I installed it and
>started watching EGTs, I started holing pistons. No matter what I did,
>my EGT's were up around 1400 on hard running.  I believe these gauges
>cause hot running. Sometimes what you don't know won't hurt you. (I
>never ask my wife what she's been up to while I've been out at sea.) ;-)
>
>JohnD
==================
The Suave One says you should have gotten the rest of the kit from 
Pegasus. You are missing the following:


<http://www.pegasusautoracing.com/productdetails.asp?RecId=5441>http://www.pegasusautoracing.com/productdetails.asp?RecId=5441




<Prev in Thread] Current Thread [Next in Thread>