I have always wondered the importance of why we have to mark the driveshaft
flange where it attaches to the diff. flange. I have often replaced
driveshafts and just simply attached them how they alligned when put in place.
I haven't noticed any difference. Did I just happen to luck upon the right
allignment every time or what?
Mike C
-----Original Message-----
>From: David Lieb <dbl@chicagolandmgclub.com>
>Sent: Mar 19, 2007 11:31 AM
>To: Spridget List <spridgets@autox.team.net>
>Subject: Re: engine/tranny removal
>
>> Probably best to unbolt from the diff, then pull down and out from the
>> tranny, after draining the tranny. You'll be under there anyway, I
>> think, to undo other things, IIRC.
>
>Might as well, since you will need to unbolt it from the diff at some
>point to re-install. Might want to scribe the two flanges at the diff
>so that you don't have to wonder whether you are putting them
>back the same way you took them apart.
>David Lieb
>
________________________________________
PeoplePC Online
A better way to Internet
http://www.peoplepc.com
|