RE: 5/8 MC rebuild

["Phil Nase" <nase@ptd.net>]

Yeh,  I know.  I was thinking 1/16 on each side of each bore.  But I had it
wrong anyway the stock bores are 7/8 as Frank said.  I'm hoping they can
sleeve them down to 3/4.

It's the new sideways, inside out math.  Donch ya know;) 


Phil Nase
Quakertown, PA
http://home.comcast.net/~philnasecpa

8 MC rebuild

Unh, when I went through school the difference between 5/8 and 3/4 was
1/8.<G>

Hal