Derf,
This info is from the Mini Spares P/N 3328RACE kit w/ dowel adjustment.
The belt is a 3/8" pitch, 3/4" wide, 52 tooth, Dayco Isoran 052R190,
made in Italy. The cam pulley is 4.724 OD, and has 40 teeth. The crank
pulley is 2.335" OD, and has 20 teeth. I did a quick caliper measurement
of the center distance at 3.946", and I would guess that dimension might
be +/- .003".
John
Fogelsville, PA
John Caffrey wrote:
> I am not running the timing belt yet, but I do have all of the parts.
> I'll pull one of the kits out tonight and give a look. You can take
> your own centerline measurements, alright?
> John
> Fogelsville, PA
>
> derf wrote:
>> Anyone running a timing belt?
>> Anyone know any of the following:
>> # teeth on pulleys
>> # teeth on belt
>> Belt type (52 tooth L series 3/8 pitch?)
>>
>> How about:
>> Distance between CL of cam and CL of crank?
>> Any other makes with similar cam/crank distance that use timing belt?
|