> Is there any problem with using a positive ground 12v supply to the
> inverter
> vs a negative ground? I'm thinking not, but I don't know much about
> inverters
> and the 12v DC to 110v AC process.
You will probably need to re-wire the plug on the end of the cord for the
inverter to reverse the leads. Aty that point, as you implied, the invertor
is getting exactly the voltage it expects. You might want to make sure that
it sits on the seat and not up against any chassis ground, put it would be
no different than the "isolation boxes" used to install decent stereos into
positive ground vehicles.
BTW, Radio Shack has a replacement plug 270-1509 that works very well.
David
|