Chris,
On the NOS inner track rods that I recently purchassed on eBay, (refering to
the adjusting end of the rod that screws into the outter track rod end:
External diameter of threds .613 in
Internal dia of threds .598 (this is high because mt calipers wouldn't
bottom out in the threads.)
pitch 18tpi
On the other end
-----Original Message-----
From: owner-spridgets@autox.team.net
[mailto:owner-spridgets@autox.team.net]On Behalf Of Chris King
Sent: Saturday, April 29, 2006 9:31 AM
To: spridgets@autox.team.net
Subject: track rod thread pitch
Listers,
Anybody know what the pitch is? I've replaced my steering rack with
another used unit, and I'verun out of adjustment on the inner track
rods. There's more thread, but it's rusted enough that the lock nuts
won't thread any further inboard, and I'm still at about 1/8" toe out
(which is much better than the 3/4" toe out I started with). I thought
I'd chase the threads to get that last 1/8 to 1/4" I need.
|