Peter C. wrote:
----- Original Message -----
> Get a universal set of wires 4, 6 or 8 cylinder. Doesn't matter,
> you'll probably be cutting the dizzy cap end anyhow if you've got the
> original style cap. I recommend solid 7mm. 8's are too big for the
> cap. I recommend angled boots at the plug end. Bosch part number
> for the wires is 09-985, 09-986, 09-987 for 4,6,8.
> Peter
All -
I guess I didn't give enough detail. I am NOT using the original screw-in
type distributor cap - I've got a modern plug-in type cap. I was looking for
a set of wires that are very short compared to typical V-8 wires. But
thanks.
Bud
|