Re: Update on the Disemboweled Midget

The later, larger is also a needle bearing vs a bronze bushing, 
making it easier to tell which you have. But if you don't have one, 
then measure the crank.
         PPP
===
At 09:26 AM 2/16/2006, David Lieb wrote:

>Make sure you measure the pilot bushing before buying anything. There were
>two different OD s for the 1275 pilot bushing and the only reliable way of
>knowing which one you need is to measure it. I seem to recall that one was
>5/8" and the other was 3/4", but I have plenty of experience in being wrong
>;-)
>David Lieb