Re: FROG AYE progress report. Longish. Real Spridget content

[Jim Rogers <jarplanner@cox.net>]

Hal

When you send your shocks & stuff to Peter C. ask him for the SKF wheel 
bearings. I replaced my Mo$$ quality bearings (fell apart in my hands) 
last month with the SKF bearings supplied by Peter - major difference in 
quality! Cost was about the same. Thanks, Peter!

Keep looking on Ebay for the drilled A-arms. I bought a good used pair 
(cleaned, powder coated) last year for about $75.

Jim Rogers
San Juan Capistrano, CA
60 Bugeye

Hal Faulkner wrote:

> Need to send the calipers and shocks to PPP for rebuilding.  Spend more money on wheel bearings.  Well
> I'm going to have it apart, I might as well....   I have Noltec bushings,
> stainless brake hoses, etc.  I have an anti-sway bar (cost more on eBay than
> it is worth....,) but my A-arms aren't drilled or reinforced.  New A-arms
> cost about $150 each but I am loathe to drill my original ones.  Anybody got
> any solutions?
>
> Hal
Your messages not reaching the list?
Check out http://www.team.net/posting.html

===  Help keep Team.Net on the air
===     http://www.team.net/donate.html

===  unsubscribe/change address requests to majordomo@autox.team.net  or try
===  http://www.team.net/cgi-bin/majorcool
===  Other lists available at
===      http://www.team.net/mailman/listinfo
===  Archives at http://www.team.net/archive
===  http://www.team.net/the-local
===  Edit your replies!