spridgets
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re[4]: timing question

from [owner-spridgets] [Permanent Link][Original]
To: "David Ramsey" <dwramsey@worldnet.att.net>
Subject: Re[4]: timing question
Date: Sun, 4 Dec 2005 09:17:12 -0800
Cc: spridgets <spridgets@autox.team.net>
References: <1347197010.20051203194014@pacifier.com> <20051204153035.0D0BF79BE@mx9.pacifier.net>
Sender: owner-spridgets@autox.team.net 
Hello David,

       i understand marking at 30 degrees... but at what rpm should
       this be taking place? .. right now i'm at about 10 degrees at
       about 1000 -> 1200 rpms.... .....

       is 30 degrees where it would be if i static timed then started
       it?... ... that is, static time at the "book" 8 degrees? .. and


       DR> So mark your crank pulley at 30deg advanced.
DR>                 Crash

DR> i also have a good bright timing light so i can do that
DR>        way too.... (unfortunately it is NOT the adjustable kind.)





        

-- 
Best regards,
 Bill                            mailto:pythias@pacifier.com
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  RE: my next car..., Unknown
Next by Date:  Re[4]: timing question, Unknown
Previous by Thread:  Re[2]: timing question, Unknown
Next by Thread:  Re[4]: timing question, Unknown
Indexes:  [Date] [Thread] [Top] [All Lists]