spridgets
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: LCB Header Question

from [Unknown] [Permanent Link][Original]
To: Frank Clarici <spritenut@exit109.com>
Subject: Re: LCB Header Question
Date: Thu, 28 Jul 2005 19:05:01 -0700
Cc: "bugeye@yahoogroups.com" <bugeye@yahoogroups.com>, Spridget List <spridgets@autox.team.net>
References: <42E95072.9030006@cox.net> <42E9529D.7070909@exit109.com>
User-agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:1.7.2) Gecko/20040804 Netscape/7.2 (ax) 
Frank

Thanks - that is exactly what I needed to know.

The LCB should gain me at least 1" of ground clearance.

Jim Rogers
San Juan Capistrano, CA

Frank Clarici wrote:

> Jim Rogers wrote:
>
>> Can anyone tell me the measurement from the bottom of a Bugeye 
>> floorpan to the bottom  the lowest header pipe on a LCB just where 
>> the LCB turn under the floorpan?
>
>
> I am running a Maniflow LCB.
> It is a 1.75 collector pipe and it sits 2 3/8" from the bottom of the 
> floor pan to the bottom of the pipe.
> I measured the floor not the seam.
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: LCB Header Question, Unknown
Next by Date:  Brake Lights, Unknown
Previous by Thread:  Re: LCB Header Question, Unknown
Next by Thread:  Brake Lights, Unknown
Indexes:  [Date] [Thread] [Top] [All Lists]