Post soon, please!!!
I have a similar setup and any help would be appreciated.
Larry
On Jun 28, 2005, at 11:54 AM, Dbcooper292@aol.com wrote:
> I decided to up the main jets on my fast street 1500/DGV. Sure
> enough it
> gained power on top, smoothness everywhere, and some resistance to
> heating up
> under a load. All in all a huge win and the motor runs great now,
> for 23
> dollars. but that's not the really good news. The really good
> news is that when i
> took the air cleaner off to do this one of the four screws holding
> the plate
> onto the carb was vibrated loose, TWO THREADS FROM GOING IN THE
> CARB! I
> probably would have gotten the jackpot on the very next ride.
>
> Thank you whoever was watching out for me.
>
> PS if anyone has a cammed/header/DGV 1500 with slightly increased
> compression
> and wants my jetting specs let me know I'll check how it all came
> out and
> post them.
>
> Mark M.
>
>
>
--
Larry B. Macy, Ph.D.
macy@bbl.med.upenn.edu
System Administrator/Manager
Neuropsychiatry Section
Department of Psychiatry
University of Pennsylvania
3400 Spruce St. - 1015 Gates
Philadelphia, PA 19104
"Now there is one outstandingly important fact regarding Spaceship
Earth, and that is that no instruction book came with it." --
Buckminster Fuller
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
MailScanner thanks transtec Computers for their support.
|