..Speaking of which, what is the best way to store old brake bits?
Cleaned, painted, disassembled or the way they come from the
"factory", clean, wrapped in wax paper?
Lester
On Jun 13, 2005, at 6:17 AM, David Lieb wrote:
>> Siezed wheel cylinders *might* be junk if you already are storing
>> a set or 2. You know, they can soak in PB Blaster for a few months
>> and become unsiezed. So yes, save one old set just incase.
>>
>
> And remember, those new wheel cylinders do not necessarily fit the
> same rubber seals as the original ones do... the time might come
> when all you can get are seal kits to fit the original cylinders
> and you might have to swear at yourself for ditching all of those
> "perfectly good" cores.
> David Lieb
|