Yup, it sounds like severe valve seat recession to me. Pull the head
and have hardened valve seats installed at your friendly neighborhood
machine shop. While your'e at it, try to figure out why #4 is getting
that hot.
Chris K.
Rick Fisk wrote:
>Sounds like the valve seat (or the valve) is going away on you. Measure the
>height of the valve stem on the offending valve (with the valve fully
>closed) and compare it to the others. I'll bet it's "taller". You're gonna
>have to pull the head anyways. :-)
>
>Rick
>
>----- Original Message -----
>From: "Brad Fornal" <toyman@digitex.net>
>To: "Spridgets" <spridgets@autox.team.net>; "Yahoo Spridget list"
><midgetsprite@yahoogroups.com>
>Sent: Wednesday, November 10, 2004 9:26 PM
>Subject: intake valve woes
>
>
>
>
>>Ok, so someone tell me WTF is
>>going on!! .......................
|