AHA!! Now it makes sense!! Thanks !!!
Lester
On Oct 29, 2004, at 8:18 PM, Greg Higgins wrote:
> Lester
>
> Do you mean the door seal that goes under the dash??
>
> If it is, you need to put a wiring harness clip on the end of the door
> seal.
> Once you have done that, you need to take the first phillips' screw
> out of
> the front surround and attach it to the wiring clip.
> The clip is held in place by the surround screw and nut.
> That is how it is held in place.
> I hope this helps.
> Greg Higgins
>
>
>
> ---- Original Message -----
> From: "Lester Ewing" <lewing@sport.rr.com>
> To: "Spridget List (E-mail)" <spridgets@autox.team.net>
> Sent: Friday, October 29, 2004 7:09 PM
> Subject: Weatherstripping detail?
>
>
>>
>> How does the leading edge of the weatherstripping get finished? i
>> know that the trailing edge goes under the side panel and is screwed
>> in
>> place but where does the front part go? The only picture i can find
>> shows it disappearing up under the dash but that really isn't specific
Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8
|