> I think that if you use LED's in place of your turn signal bulb, you may
> need to replace your blinker module with one that can operate with the
> smaller electrical load. Can anyone confirm this?
Tim,
I bought the "cheap" LED bulbs at Murray's Auto Parts last time I was having
trouble with the stock bulbs. Like Jack, the real problem wasn't the bulb,
a dirty socket in my case, but I left the LEDs in place. They are a trifle
reluctant to flash at idle, but so were the stock bulbs; over 1000rpm they
work just fine. I have no idea what flasher relay I am using, but it
certainly has not been changed recently, probably not in the last 10 years.
David Lieb
Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8
|