Oh, I see now... yes, there is a piece that screws to the back. I'll
see if I can get a photo of it for you.
Gerard
At 11:34 AM -0700 7/8/04, Bill Hunt wrote:
>I have the bulb holder itself. What I don't have it the metal piece that
>it clips into. I guess that's why the PO duct taped it. The plastic lens
>piece appears original as that is what the dash bezel screws into. It
>appears that the metal piece, whatever that looks like is missing. I was
>planning to just run a ground wire but was thinking if I can procure or
>make an original type piece it would make it easier to mount.
>
>I don't really want to re-duct tape it :)
>
>Herby
>64 MKII Sprite (Herbytoy - patiently waiting)
>62 MKII Sprite (the "resto-mod" driver)
>billh@aaai.com
>http://www.herbytoys.com
>
>-----Original Message-----
>From: gerard [mailto:pixelsmith@gerardsgarage.com]
>Sent: Thursday, July 08, 2004 11:14 AM
>To: Bill Hunt
>Cc: spridgets@autox.team.net
>Subject: Re: Signal indicator
>
>Bill,
>
>As I recall, the bulb holder is a spring loaded (tangs around the
>perimeter) press fit into the metal bezel. But that should be obvious
>to you if that's what you have. Maybe the bulb holder was changed.
>You could always run a ground wire from the holder to ground if that
>is the case.
>
>Gerard
|