Jim Juhas wrote:
> The PO welded
> the header tube to the exhaust system pipe, making it one
> solid piece from the engine back to the muffler. It seems
> to me that I have to cut it somewhere to remove the engine,
Jim
Try removing the carbs and header from the manifold/head.
Set the carbs on the brake pedal box keeping the cables still attached.
Wire the header to the steering column and just be a bit careful when
the engine comes out.
Another time saver is to remove the bottom slave bolt from under the car
but wait until you pull the engine out a bit to get to that top slave
bolt. Let the slave hang by the pipe and you shouldn,t have to bleed it
on the replacement.
--
Frank Clarici
Toms River, NJ
Two Too many Healeys
http://www.exit109.com/~spritenut
|