On Thursday 27 May 2004 05:51 pm, you wrote:
> You definitely want new or resurfaced lifters if you are putting in a
> new or reground cam. The lifter face is not actually flat, but
> imperceptibly domed or convex. This allows them to rotate on the cam
> lobe as well. Someone who re-grinds cams can usually reface and
> harden the lifters for you too.
>
The cam grinder is the one who test, refaces and hardens the lifters. But to
start with they test them for hardness and if they fail they will not re-use
them. So I need to more lifters to be reworked.
_______________________
Bill Gilroy
77 MG Midget
|