Danny Wigington wrote:
> Does your shift lever feel like it is further forward than it should
> be? If so,while you have the side cover off, try moving the first gear
> assembly away from the bearing houseing.I believe I used a long
> screwdriver through the side cover to gently move the gear, it should
> take very little pressure.You may even be able to get to the gear
> through the drain hole. It worked for me on a bench after I had pulled
> the tranny.
> ...
sure worth a try.
cheers, bill b
1969 Sprite (Bilby)
/\ /\
o o
0
|