On Apr 9, 2004, at 10:51 PM, Dave Carpenter wrote:
> I went with the parts washing fluid from Advance Auto. I built my own
> from a stainless sink bowl (dented or used ones come cheap) and a
> parts cleaner pump from Northern Hydraulic. Ran the typical sink drain
> through a hole in a 5gal pail lid and dropped the pump in the bottom
> of the pail. Filled with the cleaner and bingo.
Dave,
I built my own too. I used a utility sink. (The deep plastic type
that comes with it's own legs - about 30 bucks at any home center).
Five gallon bucket with a piece of perf steel set on 2 bricks in the
bottom to keep the pump out of the sludge. It works great! I use #2
fuel oil.
Kevin V.
|