Re: Front shock mountings

Peter C. wrote:

> So.... If a DFPO had stripped all 3 front shock mounting holes, 
> drilled and tapped them to 1/2", and drilled out the shock holes to 
> match, (and you need to replace the shocks otherwise) would you....
> a) Replace the shocks and drill the replacements? (there are good 
> reasons to NOT do this, shock-wise)
>
> b) Heli-coil (or whatever brand) the holes in the frame back to 3/8"? 
> Is that safe?
>
> c) Do it right by welding in new plates? (we'd rather not go that far 
> into the project at this time)
>
Buy a shotgun, hunt him down and ream him out with a 12 gauge slug! 

Gilroy