David,
Do you mean between the engine and the radiator? Ha, you'd be lucky
to have an inch there, even with the stock fan removed. The space
between the fan and the radiator is about 1/4 to 3/8 inch.
Gerard
At 1:43 PM -0700 7/18/03, Captain Rapture wrote:
>I have a new Kenlowe kit, built to go in front
>of the radiator in my 71 crossflow 1275 Midget,
>but I'm interested in fitting the electric fan off
>a 89 Civic Si behind the rad if there's room.
>
>With my engine out, I can't measure the gap.
>The Honda unit looks far more robust an air
>mover, but will need a minimum or 4 and a
>half inches - 5'd be better.
>
>Could one of you boys 'n girls go measure?
>
>Sure would appreciate it. It's 86 degrees in
>my shop today - could be worse, eh?
>
>Thanks
>
>David McCartney
>>From the sunny hills of Northern CA
>71 Midget
>72 Mini PU
>69 AA
>95 GSRrrrrrrrrrr
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|