Phil, if you're referring to the part that holds the vinyl shift in place on
the tunnel opening along with the rubber boot, it is metal but not chromed.
The following link shows what I am referring to in my 62 Sprite. I had this
part chromed and I installed it on top of the carpet rather than underneath it
which is the stock application.
http://home.ix.netcom.com/imagelib/sitebuilder/misc/show_image.html?linkedwidth=actual&linkpath=http://home.ix.netcom.com/~type79/sitebuildercontent/sitebuilderpictures/PinkCarInterior2-2002.JPG&target=tlx_new
That's a pretty long link, but if you copy it into your browser it should work,
if not just go to http://home.ix.netcom.com/~type79/ and double-click on the
interior shot to see a larger image.
jay fishbein
wallingford, ct
Home of The Innocenti Spyder Project
http://home.ix.netcom.com/~type79/
HAN6 / GAN5 / Innocenti 950 Spyder
-------Original Message-------
From "philip.s.jones" <philip.s.jones at comcast.net>
Sent: 07/17/03 12:48 PM
To: spridgets@autox.team.net
Subject: Seeking component - shift boot chrome retaining ring
Does anyone have a spare shift boot chrome retaining ring (in good condition)
for a '72-or-later,
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|
