Later pedal boxes are, I believe, shorter and wider than the early dual M/C
ones. The brake light switch on the later pedal boxes should be screwed in to
the end of the box, such that the button end touches the top of the brake pedal
when the pedal is at rest. There is no other bracket that I am aware of. If you
have a VB catalog, they may have an exploded view of the pedal box you could
look at for reference.
-=Chris
Chris King - cbking@alum.rpi.edu
http://mywebpages.comcast.net/kvcbk/
---------- Original Message ----------------------------------
From SDOliner at aol.com
Date: Mon, 23 Jun 2003 23:34:09 EDT
>I have a bugeye, that was fitted with a later dual master cylinder and pedal
>box. From what I can tell, the opening for this pedal box is smaller, because
>what is there was grafted on to my car with a piece or aluminum.
>I am not sure what it looks like, but I need a the bracket and brake light
>switch that mounts inside the car. I am willing to buy, trade, beg borrow or
>steal.
>
>I guess my alternative would be to swap the equalizing switch, with the stock
>bugeye tee and switch.
>
>David Oliner
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|