--- Jim Rogers <jarplanner@cox.net> wrote:
> I need to add 1 or 2 thicker gaskets between the
> intake manifold & HIF6
> SU carb (throttle link rubs against manifold).
> Already have a 1/2"
> spacer but need another 1/8"-1/4" to clear manifold.
> Only thick
> materials (1/8") found so far are cork & neoprene.
>
> Any suggestions as to best material to use? Issues
> with gas? heat? I
> really don't want anything
> dissolving/leaking/catching fire down the
> road.
>
> Thanks for any recommendations or experiences in
> this area.
>
> Jim Rogers
> San Juan Capistrano
>
Jim,
Get another 1/2 inch spacer and cut it in 2 halves.
If you can't do it, stop by a machine shop. Will the
mounting studs by long enough with the extra length??
>
__________________________________________________
Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
http://platinum.yahoo.com
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|