The problem I am running into is that the switches from the 65 won't fit on
the panel you sent. The back part of the switch body is too big. I am
cleaning and greasing the two smaller switches that I have taken apart
because they were not making contact consistantly. I have one of Ed
Esslingers wiper delay units mounted in the 68, it works like a dream!! It
is my intention to place the delay knob in the center of the panel once I
get the switches to work correctly. I will send more information on the
wiper delay installation soon.
Brad
Frank Clarici wrote:
> Brad Fornal wrote:
>
> > Which switch would work better for my application?
>
> Brad
>
> Those newer plastic 2 terminal Lucas toggles do not last.
> I used a couple on my "enhanced" dash and got maybe a year or so out of
> them. They were new when I installed them.
> Use the *real* ones from the 65. Besides, they sound much nicer when you
> flick them with their distinctive click.
> The 3 position switch will work too, I have one for my interior light.
> I have it wired to on-off-on. You will have to pick and choose where to
> put the wires, I am not positive but I think the 2 position switch gets
> power and feed on the 2 lower terminals.
>
> --
> Frank Clarici
> Toms River, NJ
> 2 Sprites, 2 Midgets
> http://www.exit109.com/~spritenut
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|