I mounted my oil cooler on the top of the steering rack behind radiator and
made a shroud out of scrap aluminum that ducts air from the top & side of the
radiator to the the oil cooler; the bottom is open. The oil & water temp stay
happy. Use 22 lb cap. Also have good ducting from the sebring bonnet to the
radiator. I seal the seams with tape- probably overkill.
"Robert E. Shlafer"
wrote:Don-
Could not agree with you more regarding
the Speedwell Alum. Downflow. Have
one of these with electric "puller" in place
of mechanical unit and together, they work great.
May I ask.....where did you mount your
oil cooler with respect to the alum. rad.?
I have mine located on a steel "shelf" in
front of the bottom of the rad., about 2"
away. Would I fare better cooling-wise
mounting it further up toward the middle
of the rad. or in a different place altogether?
Cap'n. Bob
'60 :{)
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|