spridgets
[Top] [All Lists]

Re: Different Diffs ID?

To: "Kevin & Kathy Valentine" <valntine@ptd.net>, "Larry Macy" <macy@bbl.med.upenn.edu>, "Spridgets" <spridgets@autox.team.net>
Subject: Re: Different Diffs ID?
Date: Thu, 22 Aug 2002 10:40:42 -0700
References: <B98A8836.FF3A%macy@bbl.med.upenn.edu>
Kevin,

There are two numbers stamped on the diff housing at the top of the flange
that will tell you which is which. See chart below.

RATIO  PINION/RING


             3.7  11/41    8/77; 1500; GAN6-200001 on
             3.9  10/39    1275; HAN9-77591 on;GAN4-66226 on
             4.22  9/38    1275; 1098; 948
             4.55  9/41

More good stuff here:

http://www.gerardsgarage.com/GarageContent/Tech/SpridgetSpecs.htm

GERARD

<Prev in Thread] Current Thread [Next in Thread>