There is a clevis pin that holds the cable to it. Remove the cotter pin from
the clevis and then the clevis will release the brake cable. You should be
able to get it far enough out of the mount to get to the clevis pin.
Kent
1960 Bugeye
Subject: Parking brake stickage
> Getting the electrics together for inspection and now
> it appears I have a parking brake problem. The handle
> is stuck in the topmost position and the under car
> linkage has been adjusted out to allow the shoes to
> not engage. I recall a thread awhile back addressing
> the subject. I have removed the flat countersunk screw
> and the bolt from the bracket that holds the hand
> brake handle but have a problem trying to remove it.
> Looking under the car does not seem to provide
> additional access. Before I get the bigger hammer I
> thought I would ask if anyone saved that thread.
>
> thanks, bill b. '69 Sprite
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|