John,
The switch snaps out of the bezel and should be interchangable. The switch
can be removed without breaking it (I'm not saying it's easy). Removal
procedure depends on if you have the wire clip type or just the plastic
tabs.
Gerard
At 11:52 AM -0500 2/1/02, TeachJP@aol.com wrote:
>As far as the heater switch not coming out, I had the same problem. I first
>checked to make sure that it was the switch by testing everything from the
>heater fan on back, it was "hot" all the way to the switch, so I figured it
>was the switch. I just busted the old switch out, it wasn't working anyway.
>The only real problem that I had with the new switch is that the old one had
>a black "frame" around it and the new one from Moss or who ever is chrome so
>it doesn't match the light switch or the 4-way blinker switch, but the blower
>works and I have heat and I am happy.
>John Poynton
>79 Midget "Yellow Fever"
>Havertown Pa 19083
>
--
Please visit Four Points Travel -
Discount Online International Travel Reservations
http://www.gerardsgarage.com/fourpoints
To make a reservation please call Toll Free 1-800-272-3253
G G Gerard Chateauvieux
E A
R R pixelsmith@gerardsgarage.com
A A
R G Pixelsmith on Duty
D E
S http://www.gerardsgarage.com
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|