spridgets
[Top] [All Lists]

Re: DCOE/correction on terms

To: shelden3@pldi.net, spridgets@autox.team.net
Subject: Re: DCOE/correction on terms
Date: Thu, 10 Jan 2002 09:49:00 EST
Charlie,

40 DCOE aux vents like Cap,n Bob says are available in an extended length 
likely be in a 4.50 size, part number 70005.  

You also need to check you aren't ordering 45 DCOE Aux vent or mixing up aux 
vent with main vent - the 45 main vent are shorter than the 40 main vent.  
You also have to specify for use with or without a ram pipe on the 40 DCOE.

Any change of putting up some pictures?

Nick



In a message dated 10/01/02 03:55:57 Pacific Standard Time, shelden3@pldi.net 
writes:


> OK, I'm sorry I must have been half asleep when I wrote out my first post.
> I said I pulled my velocity stacks when what I ment was my aux. venturi's.
> They are 2" long.  The ones I'm seeing at APT look to be about 1/2" long.  I
> wasn't aware that the aux venturi comes in different overall lenths.  Sorry,
> for the confussion.
> 
> Charlie

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/spridgets


<Prev in Thread] Current Thread [Next in Thread>