The pedal hole can wear. :(
http://www3.sympatico.ca/robertduquette/worn_clutch_parts.htm
( Warning: fuzzy pictures. )
Robert D.
-----Original Message-----
>From: Bill Hunt <BillH@aaai.com>
>To: Gerard Chateauvieux <pixelsmith@gerardsgarage.com>; Jon Paschke
><JPASCHKE@bak.rr.com>; spridgets@autox.team.net <spridgets@autox.team.net>
>Date: September 8, 2001 4:57 PM
>Subject: RE: Tweaking & Tuning
>
>
>>Right you are Gerard. I have found many DPO "improvements" on this car.
>>He said he "rebuilt" the brakes. I have adjusted the pushrod at the
>>master and still have the problem. The clutch pedal will pump up so
>>that's why I'm going to try bleeding. As far as the release problem I
>>think Gerard is right in that it's an adjustment issue. In a cursory
>>inspection I noticed a little play in the pedal movement at the clevis
>>piece. Could this be only the clevis in worn or does the pedal hole wear
>>as well?
>>
>>Herby
|